Supplied from inside the EU, so there is no import duty and no customs clearance fee on delivery to an EU address. No minimum order, on custom foam or on stocked tools.
Catalogue
Everything that goes into drilling, dimpling, riveting and finishing aircraft skin: rivet guns, bucking bars, squeezers, dimple dies, clecos and the hand tools around them.
Pneumatic rivet guns in 2X, 3X and 4X sizes, rated by blows per minute and shank size.
3 itemsUniversal, flush, offset and back rivet sets, sized by rivet diameter and shank.
3 itemsBucking bars by weight and profile, from light tungsten bars for confined bays to heavy...
3 itemsHand and pneumatic rivet squeezers with alligator and C yokes, rated by reach and jaw...
3 itemsHand, lazy tong and pneumatic blind riveters for pop and Cherry style fasteners.
1 itemsDimple dies, C frame tools and pneumatic dimplers, filterable by rivet size and...
4 itemsAir and electric drills for airframe work, rated by chuck size, speed and body length.
1 itemsNumber, letter and fractional drill bits in cobalt and high speed steel, sized for...
1 itemsDrill blocks, angle guides, stops and duplicators that keep a hole where the drawing says...
1 itemsReamers, countersinks and micro stop cages, sized by angle, pilot and cutter diameter.
1 itemsCleco temporary fasteners and pliers by hole size and colour, sold singly and in kits.
3 itemsFluting pliers, hand seamers, edge rollers and the forming tools that live in a sheet...
2 itemsAviation snips, nibblers and shears, in left, right and straight cut.
1 itemsSolid and blind rivets by diameter, grip length and alloy, plus the consumables around...
1 itemsAMTS-RG-2100
Light duty rivet gun for 3/32 in solid rivets and thin skin work, with a tapered trigger...
In stock 2 to 5 working days
AMTS-RG-3100
The general purpose airframe gun. Handles 3/32 in and 1/8 in solid rivets in aluminium.
In stock 2 to 5 working days
AMTS-RG-4100
Heavy duty gun for 5/32 in and 3/16 in rivets and for steel and stainless fasteners.
In stock 2 to 5 working days
AMTS-RS-1050
Universal head sets covering 3/32 in to 3/16 in, on a 0.401 in shank.
In stock 2 to 5 working days
AMTS-RS-2030
Swivel flush set for countersunk and dimpled rivets, 3 in reach.
In stock 2 to 5 working days
AMTS-RS-3120
Long reach back rivet set for driving from the flush side, deep inside a structure.
In stock 2 to 5 working days
AMTS-BB-1040
Four profiles covering most airframe access, from open skin to a tight corner.
In stock 2 to 5 working days
AMTS-BB-2110
Tungsten, so the mass is in a much smaller bar. For confined structure.
In stock 2 to 5 working days
AMTS-BB-3050
Deep offset for tail cone and empennage rib work where a straight bar cannot reach.
In stock 2 to 5 working days
AMTS-SQ-1010
Squeezes a rivet in one controlled motion, with no noise and no hammering.
In stock 2 to 5 working days
AMTS-SQ-2000
Air over hydraulic squeezer for production runs and for hands that have to last the shift.
Made to order 5 to 10 working days
AMTS-SQ-3030
Deep 3 in yoke for reaching a rivet line set back from the edge.
In stock 2 to 5 working days
AMTS-BR-1000
Scissor action riveter for large blind rivets, including stainless stems.
In stock 2 to 5 working days
AMTS-DD-1332
Matched male and female dies for 3/32 in flush rivets, 120 degree.
In stock 2 to 5 working days
AMTS-DD-1180
Matched male and female dies for 1/8 in flush rivets, 120 degree.
In stock 2 to 5 working days
AMTS-DD-2000
Thin bodied dies for dimpling inside a flange or up against a rib.
In stock 2 to 5 working days
AMTS-DT-1000
Bench mounted C frame for dimpling a long run of holes accurately.
Made to order 5 to 10 working days
AMTS-DR-1000
Right angle head for drilling in a bay where a pistol grip will not fit.
In stock 2 to 5 working days
AMTS-DB-1000
The number sizes that matter: #30, #40, #21, #10 and #12, in cobalt.
In stock 2 to 5 working days
AMTS-CS-1000
Adjustable depth stop so every countersink is the same depth as the first one.
In stock 2 to 5 working days
AMTS-CL-1000
The pliers that fit every cleco size. You need at least one pair.
In stock 2 to 5 working days
AMTS-CL-2332
The copper coloured one, for #40 holes. Sold singly.
In stock 2 to 5 working days
AMTS-CL-3100
100 clecos across the two common sizes, a pair of pliers and a case to keep them in.
In stock 2 to 5 working days
AMTS-HT-1000
For straightening a rib flange that curled when you formed it.
In stock 2 to 5 working days
Every request for quote is answered within one working day. No minimum order, on custom foam or on stocked tools.
